SilverStone SX500-LG Manual download pdf (Page 8)

The +5V/+12V/+3.3V DC output are protected against the over voltage condition . Maximum value

can't be over 6.5V at 5V terminal and 16.0V at 12V, 4.5V at 3.3V.

4.2.2 Over Voltage Protection

The power supply can be used electronic circuit to limit the output current against exceeding 50%

of surge output power or protected against excessive power delivery since short circuit of any output

or over total power at high line.

4.2.3 Over Power Protection

Short circuit placed on +5V,+12V,+3.3V,-12V will latch off. +5VSB will auto-recovery.

4.2.4 Short Circuit Protection

5.1 No Load Start

When power is applied to SST-SX500-LG with no load connected or under minimum load connected,

neither damage to power supply nor hazards to users will occur.

5.2 Cold Start

The power supply shall operate properly when first applied at normal input voltage and or so maximum

load after 4 hours storage in 0℃ environment.

5. Start Stability

6.1 Temperature and Humidity

6.1.1 Operating

6. Environments

Temperature

Relative Humidity

0 to 40 C

20 to 90 %

1 2 3 4 5 6 7 8 9 10 11 12

No comments

SilverStone SX500-LG Manual Page 8